diff --git a/arch/mips/dts/ar934x.dtsi b/arch/mips/dts/ar934x.dtsi
new file mode 100644
index 0000000..7a036a8
--- /dev/null
+++ b/arch/mips/dts/ar934x.dtsi
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "qca,ar934x";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips74Kc";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		xtal: xtal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-output-names = "xtal";
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		apb {
+			compatible = "simple-bus";
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ehci0: ehci@1b000100 {
+				compatible = "generic-ehci";
+				reg = <0x1b000100 0x100>;
+
+				status = "disabled";
+			};
+
+			uart0: uart@18020000 {
+				compatible = "ns16550";
+				reg = <0x18020000 0x20>;
+				reg-shift = <2>;
+
+				status = "disabled";
+			};
+
+			gmac0: eth@0x19000000 {
+				compatible = "qca,ag934x-mac";
+				reg = <0x19000000 0x200>;
+				phy = <&phy0>;
+				phy-mode = "rgmii";
+
+				status = "disabled";
+
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					phy0: ethernet-phy@0 {
+						reg = <0>;
+					};
+				};
+			};
+
+			gmac1: eth@0x1a000000 {
+				compatible = "qca,ag934x-mac";
+				reg = <0x1a000000 0x200>;
+				phy = <&phy1>;
+				phy-mode = "rgmii";
+
+				status = "disabled";
+
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					phy1: ethernet-phy@0 {
+						reg = <0>;
+					};
+				};
+			};
+		};
+
+		spi0: spi@1f000000 {
+			compatible = "qca,ar7100-spi";
+			reg = <0x1f000000 0x10>;
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig
index f45403b..527960f 100644
--- a/arch/mips/mach-ath79/Kconfig
+++ b/arch/mips/mach-ath79/Kconfig
@@ -13,6 +13,15 @@
 	help
 	  This supports QCA/Atheros ar933x family SOCs.
 
+config SOC_AR934X
+	bool
+	select SUPPORTS_BIG_ENDIAN
+	select SUPPORTS_CPU_MIPS32_R1
+	select SUPPORTS_CPU_MIPS32_R2
+	select MIPS_TUNE_74KC
+	help
+	  This supports QCA/Atheros ar934x family SOCs.
+
 config SOC_QCA953X
 	bool
 	select SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/mach-ath79/Makefile b/arch/mips/mach-ath79/Makefile
index 160dfaa..d7e2666 100644
--- a/arch/mips/mach-ath79/Makefile
+++ b/arch/mips/mach-ath79/Makefile
@@ -7,4 +7,5 @@
 obj-y += dram.o
 
 obj-$(CONFIG_SOC_AR933X)	+= ar933x/
-obj-$(CONFIG_SOC_QCA953X)	+= qca953x/
\ No newline at end of file
+obj-$(CONFIG_SOC_AR934X)	+= ar934x/
+obj-$(CONFIG_SOC_QCA953X)	+= qca953x/
diff --git a/arch/mips/mach-ath79/ar934x/Makefile b/arch/mips/mach-ath79/ar934x/Makefile
new file mode 100644
index 0000000..348c65b
--- /dev/null
+++ b/arch/mips/mach-ath79/ar934x/Makefile
@@ -0,0 +1,7 @@
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += cpu.o
+obj-y += clk.o
+obj-y += ddr.o
diff --git a/arch/mips/mach-ath79/ar934x/clk.c b/arch/mips/mach-ath79/ar934x/clk.c
new file mode 100644
index 0000000..9c65184
--- /dev/null
+++ b/arch/mips/mach-ath79/ar934x/clk.c
@@ -0,0 +1,334 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <mach/ar71xx_regs.h>
+#include <mach/reset.h>
+#include <wait_bit.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * The math for calculating PLL:
+ *                                       NFRAC * 2^8
+ *                               NINT + -------------
+ *                XTAL [MHz]              2^(18 - 1)
+ *   PLL [MHz] = ------------ * ----------------------
+ *                  REFDIV              2^OUTDIV
+ *
+ * Unfortunatelly, there is no way to reliably compute the variables.
+ * The vendor U-Boot port contains macros for various combinations of
+ * CPU PLL / DDR PLL / AHB bus speed and there is no obvious pattern
+ * in those numbers.
+ */
+struct ar934x_pll_config {
+	u8	range;
+	u8	refdiv;
+	u8	outdiv;
+	/* Index 0 is for XTAL=25MHz , Index 1 is for XTAL=40MHz */
+	u8	nint[2];
+};
+
+struct ar934x_clock_config {
+	u16				cpu_freq;
+	u16				ddr_freq;
+	u16				ahb_freq;
+
+	struct ar934x_pll_config	cpu_pll;
+	struct ar934x_pll_config	ddr_pll;
+};
+
+static const struct ar934x_clock_config ar934x_clock_config[] = {
+	{ 300, 300, 150, { 1, 1, 1, { 24, 15 } }, { 1, 1, 1, { 24, 15 } } },
+	{ 400, 200, 200, { 1, 1, 1, { 32, 20 } }, { 1, 1, 2, { 32, 20 } } },
+	{ 400, 400, 200, { 0, 1, 1, { 32, 20 } }, { 0, 1, 1, { 32, 20 } } },
+	{ 500, 400, 200, { 1, 1, 0, { 20, 12 } }, { 0, 1, 1, { 32, 20 } } },
+	{ 533, 400, 200, { 1, 1, 0, { 21, 13 } }, { 0, 1, 1, { 32, 20 } } },
+	{ 533, 500, 250, { 1, 1, 0, { 21, 13 } }, { 0, 1, 0, { 20, 12 } } },
+	{ 560, 480, 240, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 19, 12 } } },
+	{ 566, 400, 200, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 16, 10 } } },
+	{ 566, 450, 225, { 1, 1, 0, { 22, 14 } }, { 0, 1, 1, { 36, 22 } } },
+	{ 566, 475, 237, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 19, 11 } } },
+	{ 566, 500, 250, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 20, 12 } } },
+	{ 566, 525, 262, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 21, 13 } } },
+	{ 566, 550, 275, { 1, 1, 0, { 22, 14 } }, { 1, 1, 0, { 22, 13 } } },
+	{ 600, 266, 133, { 0, 1, 0, { 24, 15 } }, { 1, 1, 1, { 21, 16 } } },
+	{ 600, 266, 200, { 0, 1, 0, { 24, 15 } }, { 1, 1, 1, { 21, 16 } } },
+	{ 600, 300, 150, { 0, 1, 0, { 24, 15 } }, { 0, 1, 1, { 24, 15 } } },
+	{ 600, 332, 166, { 0, 1, 0, { 24, 15 } }, { 1, 1, 1, { 26, 16 } } },
+	{ 600, 332, 200, { 0, 1, 0, { 24, 15 } }, { 1, 1, 1, { 26, 16 } } },
+	{ 600, 400, 200, { 0, 1, 0, { 24, 15 } }, { 0, 1, 1, { 32, 20 } } },
+	{ 600, 450, 200, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 18, 20 } } },
+	{ 600, 500, 250, { 0, 1, 0, { 24, 15 } }, { 1, 1, 0, { 20, 12 } } },
+	{ 600, 525, 262, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 21, 20 } } },
+	{ 600, 550, 275, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 22, 20 } } },
+	{ 600, 575, 287, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 23, 14 } } },
+	{ 600, 600, 300, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 24, 20 } } },
+	{ 600, 650, 325, { 0, 1, 0, { 24, 15 } }, { 0, 1, 0, { 26, 20 } } },
+	{ 650, 600, 300, { 0, 1, 0, { 26, 15 } }, { 0, 1, 0, { 24, 20 } } },
+	{ 700, 400, 200, { 3, 1, 0, { 28, 17 } }, { 0, 1, 1, { 32, 20 } } },
+};
+
+static void ar934x_srif_pll_cfg(void __iomem *pll_reg_base, const u32 srif_val)
+{
+	u32 reg;
+	do {
+		writel(0x10810f00, pll_reg_base + 0x4);
+		writel(srif_val, pll_reg_base + 0x0);
+		writel(0xd0810f00, pll_reg_base + 0x4);
+		writel(0x03000000, pll_reg_base + 0x8);
+		writel(0xd0800f00, pll_reg_base + 0x4);
+
+		clrbits_be32(pll_reg_base + 0x8, BIT(30));
+		udelay(5);
+		setbits_be32(pll_reg_base + 0x8, BIT(30));
+		udelay(5);
+
+		wait_for_bit("clk", pll_reg_base + 0xc, BIT(3), 1, 10, 0);
+
+		clrbits_be32(pll_reg_base + 0x8, BIT(30));
+		udelay(5);
+
+		/* Check if CPU SRIF PLL locked. */
+		reg = readl(pll_reg_base + 0x8);
+		reg = (reg & 0x7ffff8) >> 3;
+	} while (reg >= 0x40000);
+}
+
+void ar934x_pll_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz)
+{
+	void __iomem *srif_regs = map_physmem(AR934X_SRIF_BASE,
+					      AR934X_SRIF_SIZE, MAP_NOCACHE);
+	void __iomem *pll_regs = map_physmem(AR71XX_PLL_BASE,
+					     AR71XX_PLL_SIZE, MAP_NOCACHE);
+	const struct ar934x_pll_config *pll_cfg;
+	int i, pll_nint, pll_refdiv, xtal_40 = 0;
+	u32 reg, cpu_pll, cpu_srif, ddr_pll, ddr_srif;
+
+	/* Configure SRIF PLL with initial values. */
+	writel(0x13210f00, srif_regs + AR934X_SRIF_CPU_DPLL2_REG);
+	writel(0x03000000, srif_regs + AR934X_SRIF_CPU_DPLL3_REG);
+	writel(0x13210f00, srif_regs + AR934X_SRIF_DDR_DPLL2_REG);
+	writel(0x03000000, srif_regs + AR934X_SRIF_DDR_DPLL3_REG);
+	writel(0x03000000, srif_regs + 0x188); /* Undocumented reg :-) */
+
+	/* Test for 40MHz XTAL */
+	reg = get_bootstrap();
+	if (reg & AR934X_BOOTSTRAP_REF_CLK_40) {
+		xtal_40 = 1;
+		cpu_srif = 0x41c00000;
+		ddr_srif = 0x41680000;
+	} else {
+		xtal_40 = 0;
+		cpu_srif = 0x29c00000;
+		ddr_srif = 0x29680000;
+	}
+
+	/* Locate CPU/DDR PLL configuration */
+	for (i = 0; i < ARRAY_SIZE(ar934x_clock_config); i++) {
+		if (cpu_mhz != ar934x_clock_config[i].cpu_freq)
+			continue;
+		if (ddr_mhz != ar934x_clock_config[i].ddr_freq)
+			continue;
+		if (ahb_mhz != ar934x_clock_config[i].ahb_freq)
+			continue;
+
+		/* Entry found */
+		pll_cfg = &ar934x_clock_config[i].cpu_pll;
+		pll_nint = pll_cfg->nint[xtal_40];
+		pll_refdiv = pll_cfg->refdiv;
+		cpu_pll =
+			(pll_nint << AR934X_PLL_CPU_CONFIG_NINT_SHIFT) |
+			(pll_refdiv << AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) |
+			(pll_cfg->range << AR934X_PLL_CPU_CONFIG_RANGE_SHIFT) |
+			(pll_cfg->outdiv << AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT);
+
+		pll_cfg = &ar934x_clock_config[i].ddr_pll;
+		pll_nint = pll_cfg->nint[xtal_40];
+		pll_refdiv = pll_cfg->refdiv;
+		ddr_pll =
+			(pll_nint << AR934X_PLL_DDR_CONFIG_NINT_SHIFT) |
+			(pll_refdiv << AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) |
+			(pll_cfg->range << AR934X_PLL_DDR_CONFIG_RANGE_SHIFT) |
+			(pll_cfg->outdiv << AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT);
+		break;
+	}
+
+	/* PLL configuration not found, hang. */
+	if (i == ARRAY_SIZE(ar934x_clock_config))
+		hang();
+
+	/* Set PLL Bypass */
+	setbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+		     AR934X_PLL_CLK_CTRL_CPU_PLL_BYPASS);
+	setbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+		     AR934X_PLL_CLK_CTRL_DDR_PLL_BYPASS);
+	setbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+		     AR934X_PLL_CLK_CTRL_AHB_PLL_BYPASS);
+
+	/* Configure CPU PLL */
+	writel(cpu_pll | AR934X_PLL_CPU_CONFIG_PLLPWD,
+	       pll_regs + AR934X_PLL_CPU_CONFIG_REG);
+	/* Configure DDR PLL */
+	writel(ddr_pll | AR934X_PLL_DDR_CONFIG_PLLPWD,
+	       pll_regs + AR934X_PLL_DDR_CONFIG_REG);
+	/* Configure PLL routing */
+	writel(AR934X_PLL_CLK_CTRL_CPU_PLL_BYPASS |
+	       AR934X_PLL_CLK_CTRL_DDR_PLL_BYPASS |
+	       AR934X_PLL_CLK_CTRL_AHB_PLL_BYPASS |
+	       (0 << AR934X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) |
+	       (0 << AR934X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) |
+	       (1 << AR934X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) |
+	       AR934X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL |
+	       AR934X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL |
+	       AR934X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL,
+	       pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
+
+	/* Configure SRIF PLLs, which is completely undocumented :-) */
+	ar934x_srif_pll_cfg(srif_regs + AR934X_SRIF_CPU_DPLL1_REG, cpu_srif);
+	ar934x_srif_pll_cfg(srif_regs + AR934X_SRIF_DDR_DPLL1_REG, ddr_srif);
+
+	/* Unset PLL Bypass */
+	clrbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+		     AR934X_PLL_CLK_CTRL_CPU_PLL_BYPASS);
+	clrbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+		     AR934X_PLL_CLK_CTRL_DDR_PLL_BYPASS);
+	clrbits_be32(pll_regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG,
+		     AR934X_PLL_CLK_CTRL_AHB_PLL_BYPASS);
+
+	/* Enable PLL dithering */
+	writel((1 << AR934X_PLL_DDR_DIT_FRAC_STEP_SHIFT) |
+	       (0xf << AR934X_PLL_DDR_DIT_UPD_CNT_SHIFT),
+	       pll_regs + AR934X_PLL_DDR_DIT_FRAC_REG);
+	writel(48 << AR934X_PLL_CPU_DIT_UPD_CNT_SHIFT,
+	       pll_regs + AR934X_PLL_CPU_DIT_FRAC_REG);
+}
+
+static u32 ar934x_get_xtal(void)
+{
+	u32 val;
+
+	val = get_bootstrap();
+	if (val & AR934X_BOOTSTRAP_REF_CLK_40)
+		return 40000000;
+	else
+		return 25000000;
+}
+
+int get_serial_clock(void)
+{
+	return ar934x_get_xtal();
+}
+
+static u32 ar934x_cpupll_to_hz(const u32 regval)
+{
+	const u32 outdiv = (regval >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+			   AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
+	const u32 refdiv = (regval >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+			   AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
+	const u32 nint = (regval >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
+			   AR934X_PLL_CPU_CONFIG_NINT_MASK;
+	const u32 nfrac = (regval >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+			   AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
+	const u32 xtal = ar934x_get_xtal();
+
+	return (xtal * (nint + (nfrac >> 9))) / (refdiv * (1 << outdiv));
+}
+
+static u32 ar934x_ddrpll_to_hz(const u32 regval)
+{
+	const u32 outdiv = (regval >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+			   AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
+	const u32 refdiv = (regval >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+			   AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
+	const u32 nint = (regval >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
+			   AR934X_PLL_DDR_CONFIG_NINT_MASK;
+	const u32 nfrac = (regval >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+			   AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
+	const u32 xtal = ar934x_get_xtal();
+
+	return (xtal * (nint + (nfrac >> 9))) / (refdiv * (1 << outdiv));
+}
+
+static void ar934x_update_clock(void)
+{
+	void __iomem *regs;
+	u32 ctrl, cpu, cpupll, ddr, ddrpll;
+	u32 cpudiv, ddrdiv, busdiv;
+	u32 cpuclk, ddrclk, busclk;
+
+	regs = map_physmem(AR71XX_PLL_BASE, AR71XX_PLL_SIZE,
+			   MAP_NOCACHE);
+
+	cpu = readl(regs + AR934X_PLL_CPU_CONFIG_REG);
+	ddr = readl(regs + AR934X_PLL_DDR_CONFIG_REG);
+	ctrl = readl(regs + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
+
+	cpupll = ar934x_cpupll_to_hz(cpu);
+	ddrpll = ar934x_ddrpll_to_hz(ddr);
+
+	if (ctrl & AR934X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
+		cpuclk = ar934x_get_xtal();
+	else if (ctrl & AR934X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
+		cpuclk = cpupll;
+	else
+		cpuclk = ddrpll;
+
+	if (ctrl & AR934X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
+		ddrclk = ar934x_get_xtal();
+	else if (ctrl & AR934X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
+		ddrclk = ddrpll;
+	else
+		ddrclk = cpupll;
+
+	if (ctrl & AR934X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
+		busclk = ar934x_get_xtal();
+	else if (ctrl & AR934X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
+		busclk = ddrpll;
+	else
+		busclk = cpupll;
+
+	cpudiv = (ctrl >> AR934X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+		 AR934X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
+	ddrdiv = (ctrl >> AR934X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
+		 AR934X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
+	busdiv = (ctrl >> AR934X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
+		 AR934X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
+
+	gd->cpu_clk = cpuclk / (cpudiv + 1);
+	gd->mem_clk = ddrclk / (ddrdiv + 1);
+	gd->bus_clk = busclk / (busdiv + 1);
+}
+
+ulong get_bus_freq(ulong dummy)
+{
+	ar934x_update_clock();
+	return gd->bus_clk;
+}
+
+ulong get_ddr_freq(ulong dummy)
+{
+	ar934x_update_clock();
+	return gd->mem_clk;
+}
+
+int do_ar934x_showclk(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	ar934x_update_clock();
+	printf("CPU:       %8ld MHz\n", gd->cpu_clk / 1000000);
+	printf("Memory:    %8ld MHz\n", gd->mem_clk / 1000000);
+	printf("AHB:       %8ld MHz\n", gd->bus_clk / 1000000);
+	return 0;
+}
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_ar934x_showclk,
+	"display clocks",
+	""
+);
diff --git a/arch/mips/mach-ath79/ar934x/cpu.c b/arch/mips/mach-ath79/ar934x/cpu.c
new file mode 100644
index 0000000..8fcdf65
--- /dev/null
+++ b/arch/mips/mach-ath79/ar934x/cpu.c
@@ -0,0 +1,10 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+/* The lowlevel_init() is not needed on AR934x */
+void lowlevel_init(void) {}
diff --git a/arch/mips/mach-ath79/ar934x/ddr.c b/arch/mips/mach-ath79/ar934x/ddr.c
new file mode 100644
index 0000000..4621d58
--- /dev/null
+++ b/arch/mips/mach-ath79/ar934x/ddr.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * Based on RAM init sequence by Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <mach/ar71xx_regs.h>
+#include <mach/reset.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+	AR934X_SDRAM = 0,
+	AR934X_DDR1,
+	AR934X_DDR2,
+};
+
+struct ar934x_mem_config {
+	u32	config1;
+	u32	config2;
+	u32	mode;
+	u32	extmode;
+	u32	tap;
+};
+
+static const struct ar934x_mem_config ar934x_mem_config[] = {
+	[AR934X_SDRAM] = { 0x7fbe8cd0, 0x959f66a8, 0x33, 0, 0x1f1f },
+	[AR934X_DDR1]  = { 0x7fd48cd0, 0x99d0e6a8, 0x33, 0, 0x14 },
+	[AR934X_DDR2]  = { 0xc7d48cd0, 0x9dd0e6a8, 0x33, 0, 0x10012 },
+};
+
+void ar934x_ddr_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz)
+{
+	void __iomem *ddr_regs;
+	const struct ar934x_mem_config *memcfg;
+	int memtype;
+	u32 reg, cycle, ctl;
+
+	ddr_regs = map_physmem(AR71XX_DDR_CTRL_BASE, AR71XX_DDR_CTRL_SIZE,
+			       MAP_NOCACHE);
+
+	reg = get_bootstrap();
+	if (reg & AR934X_BOOTSTRAP_SDRAM_DISABLED) {	/* DDR */
+		if (reg & AR934X_BOOTSTRAP_DDR1) {	/* DDR 1 */
+			memtype = AR934X_DDR1;
+			cycle = 0xffff;
+		} else {				/* DDR 2 */
+			memtype = AR934X_DDR2;
+			if (gd->arch.rev) {
+				ctl = BIT(6);	/* Undocumented bit :-( */
+				if (reg & BIT(3))
+					cycle = 0xff;
+				else
+					cycle = 0xffff;
+			} else {
+				/* Force DDR2/x16 configuratio on old chips. */
+				ctl = 0;
+				cycle = 0xffff;		/* DDR2 16bit */
+			}
+
+			writel(0xe59, ddr_regs + AR934X_DDR_REG_DDR2_CONFIG);
+			udelay(100);
+
+			writel(0x10, ddr_regs + AR71XX_DDR_REG_CONTROL);
+			udelay(10);
+
+			writel(0x20, ddr_regs + AR71XX_DDR_REG_CONTROL);
+			udelay(10);
+
+			writel(ctl, ddr_regs + AR934X_DDR_REG_CTL_CONF);
+			udelay(10);
+		}
+	} else {					/* SDRAM */
+		memtype = AR934X_SDRAM;
+		cycle = 0xffffffff;
+
+		writel(0x13b, ddr_regs + AR934X_DDR_REG_CTL_CONF);
+		udelay(100);
+
+		/* Undocumented register */
+		writel(0x13b, ddr_regs + 0x118);
+		udelay(100);
+	}
+
+	memcfg = &ar934x_mem_config[memtype];
+
+	writel(memcfg->config1, ddr_regs + AR71XX_DDR_REG_CONFIG);
+	udelay(100);
+
+	writel(memcfg->config2, ddr_regs + AR71XX_DDR_REG_CONFIG2);
+	udelay(100);
+
+	writel(0x8, ddr_regs + AR71XX_DDR_REG_CONTROL);
+	udelay(10);
+
+	writel(memcfg->mode | 0x100, ddr_regs + AR71XX_DDR_REG_MODE);
+	mdelay(1);
+
+	writel(0x1, ddr_regs + AR71XX_DDR_REG_CONTROL);
+	udelay(10);
+
+	if (memtype == AR934X_DDR2) {
+		writel(memcfg->mode | 0x100, ddr_regs + AR71XX_DDR_REG_EMR);
+		udelay(100);
+
+		writel(0x2, ddr_regs + AR71XX_DDR_REG_CONTROL);
+		udelay(10);
+	}
+
+	if (memtype != AR934X_SDRAM)
+		writel(0x402, ddr_regs + AR71XX_DDR_REG_EMR);
+
+	udelay(100);
+
+	writel(0x2, ddr_regs + AR71XX_DDR_REG_CONTROL);
+	udelay(10);
+
+	writel(0x8, ddr_regs + AR71XX_DDR_REG_CONTROL);
+	udelay(10);
+
+	writel(memcfg->mode, ddr_regs + AR71XX_DDR_REG_MODE);
+	udelay(100);
+
+	writel(0x1, ddr_regs + AR71XX_DDR_REG_CONTROL);
+	udelay(10);
+
+	writel(0x412c /* FIXME */, ddr_regs + AR71XX_DDR_REG_REFRESH);
+	udelay(100);
+
+	writel(memcfg->tap, ddr_regs + AR71XX_DDR_REG_TAP_CTRL0);
+	writel(memcfg->tap, ddr_regs + AR71XX_DDR_REG_TAP_CTRL1);
+
+	if (memtype != AR934X_SDRAM) {
+		if ((gd->arch.rev && (reg & BIT(3))) || !gd->arch.rev) {
+			writel(memcfg->tap,
+			       ddr_regs + AR934X_DDR_REG_TAP_CTRL2);
+			writel(memcfg->tap,
+			       ddr_regs + AR934X_DDR_REG_TAP_CTRL3);
+		}
+	}
+
+	writel(cycle, ddr_regs + AR71XX_DDR_REG_RD_CYCLE);
+	udelay(100);
+
+	writel(0x74444444, ddr_regs + AR934X_DDR_REG_BURST);
+	udelay(100);
+
+	writel(0x222, ddr_regs + AR934X_DDR_REG_BURST2);
+	udelay(100);
+
+	writel(0xfffff, ddr_regs + AR934X_DDR_REG_TIMEOUT_MAX);
+	udelay(100);
+}
+
+void ddr_tap_tuning(void)
+{
+}
diff --git a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
index a9630c0..a8e51cb 100644
--- a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
+++ b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
@@ -250,11 +250,22 @@
 #define AR933X_DDR_REG_TIMEOUT_CNT			0x9c
 #define AR933X_DDR_REG_TIMEOUT_ADDR			0x9c
 
+#define AR934X_DDR_REG_TAP_CTRL2			0x24
+#define AR934X_DDR_REG_TAP_CTRL3			0x28
 #define AR934X_DDR_REG_FLUSH_GE0			0x9c
 #define AR934X_DDR_REG_FLUSH_GE1			0xa0
 #define AR934X_DDR_REG_FLUSH_USB			0xa4
 #define AR934X_DDR_REG_FLUSH_PCIE			0xa8
 #define AR934X_DDR_REG_FLUSH_WMAC			0xac
+#define AR934X_DDR_REG_FLUSH_SRC1			0xb0
+#define AR934X_DDR_REG_FLUSH_SRC2			0xb4
+#define AR934X_DDR_REG_DDR2_CONFIG			0xb8
+#define AR934X_DDR_REG_EMR2				0xbc
+#define AR934X_DDR_REG_EMR3				0xc0
+#define AR934X_DDR_REG_BURST				0xc4
+#define AR934X_DDR_REG_BURST2				0xc8
+#define AR934X_DDR_REG_TIMEOUT_MAX			0xcc
+#define AR934X_DDR_REG_CTL_CONF				0x108
 
 #define QCA953X_DDR_REG_FLUSH_GE0			0x9c
 #define QCA953X_DDR_REG_FLUSH_GE1			0xa0
@@ -341,6 +352,8 @@
 #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG			0x08
 #define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG		0x24
 #define AR934X_PLL_ETH_XMII_CONTROL_REG			0x2c
+#define AR934X_PLL_DDR_DIT_FRAC_REG			0x44
+#define AR934X_PLL_CPU_DIT_FRAC_REG			0x48
 
 #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT		0
 #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK		0x3f
@@ -348,8 +361,12 @@
 #define AR934X_PLL_CPU_CONFIG_NINT_MASK			0x3f
 #define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT		12
 #define AR934X_PLL_CPU_CONFIG_REFDIV_MASK		0x1f
+#define AR934X_PLL_CPU_CONFIG_RANGE_SHIFT		17
+#define AR934X_PLL_CPU_CONFIG_RANGE_MASK		0x3
 #define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT		19
 #define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK		0x3
+#define AR934X_PLL_CPU_CONFIG_PLLPWD			BIT(30)
+#define AR934X_PLL_CPU_CONFIG_UPDATING			BIT(31)
 
 #define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT		0
 #define AR934X_PLL_DDR_CONFIG_NFRAC_MASK		0x3ff
@@ -357,8 +374,12 @@
 #define AR934X_PLL_DDR_CONFIG_NINT_MASK			0x3f
 #define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT		16
 #define AR934X_PLL_DDR_CONFIG_REFDIV_MASK		0x1f
+#define AR934X_PLL_DDR_CONFIG_RANGE_SHIFT		21
+#define AR934X_PLL_DDR_CONFIG_RANGE_MASK		0x3
 #define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT		23
 #define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK		0x7
+#define AR934X_PLL_DDR_CONFIG_PLLPWD			BIT(30)
+#define AR934X_PLL_DDR_CONFIG_UPDATING			BIT(31)
 
 #define AR934X_PLL_CLK_CTRL_CPU_PLL_BYPASS		BIT(2)
 #define AR934X_PLL_CLK_CTRL_DDR_PLL_BYPASS		BIT(3)
@@ -375,6 +396,26 @@
 
 #define AR934X_PLL_SWITCH_CLK_CTRL_MDIO_CLK_SEL		BIT(6)
 
+#define AR934X_PLL_DDR_DIT_FRAC_MAX_SHIFT		0
+#define AR934X_PLL_DDR_DIT_FRAC_MAX_MASK		0x3ff
+#define AR934X_PLL_DDR_DIT_FRAC_MIN_SHIFT		10
+#define AR934X_PLL_DDR_DIT_FRAC_MIN_MASK		0x3ff
+#define AR934X_PLL_DDR_DIT_FRAC_STEP_SHIFT		20
+#define AR934X_PLL_DDR_DIT_FRAC_STEP_MASK		0x3f
+#define AR934X_PLL_DDR_DIT_UPD_CNT_SHIFT		27
+#define AR934X_PLL_DDR_DIT_UPD_CNT_MASK			0x3f
+#define AR934X_PLL_DDR_DIT_DITHER_EN			BIT(31)
+
+#define AR934X_PLL_CPU_DIT_FRAC_MAX_SHIFT		0
+#define AR934X_PLL_CPU_DIT_FRAC_MAX_MASK		0x3f
+#define AR934X_PLL_CPU_DIT_FRAC_MIN_SHIFT		6
+#define AR934X_PLL_CPU_DIT_FRAC_MIN_MASK		0x3f
+#define AR934X_PLL_CPU_DIT_FRAC_STEP_SHIFT		12
+#define AR934X_PLL_CPU_DIT_FRAC_STEP_MASK		0x3f
+#define AR934X_PLL_CPU_DIT_UPD_CNT_SHIFT		18
+#define AR934X_PLL_CPU_DIT_UPD_CNT_MASK			0x3f
+#define AR934X_PLL_CPU_DIT_DITHER_EN			BIT(31)
+
 #define QCA953X_PLL_CPU_CONFIG_REG			0x00
 #define QCA953X_PLL_DDR_CONFIG_REG			0x04
 #define QCA953X_PLL_CLK_CTRL_REG			0x08
@@ -1081,10 +1122,12 @@
 #define AR934X_SRIF_CPU_DPLL1_REG			0x1c0
 #define AR934X_SRIF_CPU_DPLL2_REG			0x1c4
 #define AR934X_SRIF_CPU_DPLL3_REG			0x1c8
+#define AR934X_SRIF_CPU_DPLL4_REG			0x1cc
 
 #define AR934X_SRIF_DDR_DPLL1_REG			0x240
 #define AR934X_SRIF_DDR_DPLL2_REG			0x244
 #define AR934X_SRIF_DDR_DPLL3_REG			0x248
+#define AR934X_SRIF_DDR_DPLL4_REG			0x24c
 
 #define AR934X_SRIF_DPLL1_REFDIV_SHIFT			27
 #define AR934X_SRIF_DPLL1_REFDIV_MASK			0x1f
diff --git a/arch/mips/mach-ath79/include/mach/ath79.h b/arch/mips/mach-ath79/include/mach/ath79.h
index 2c6c118..17af082 100644
--- a/arch/mips/mach-ath79/include/mach/ath79.h
+++ b/arch/mips/mach-ath79/include/mach/ath79.h
@@ -143,4 +143,7 @@
 int ath79_eth_reset(void);
 int ath79_usb_reset(void);
 
+void ar934x_pll_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz);
+void ar934x_ddr_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz);
+
 #endif /* __ASM_MACH_ATH79_H */